UK to EU Shipping: We will dispatch all EU orders from Belgium. NO HASSLE, NO TAX, NO DUTY, NO EXTRA CHARGES UK to USA Delivery, No Hassle, Directly from the manufacturer. UK to Australia & New Zealand Shipping: We will dispatch all Orders from Australia. NO HASSLE, NO TAX, NO DUTY, NO EXTRA CHARGES UK to EU Shipping: We will dispatch all EU orders from Belgium. NO HASSLE, NO TAX, NO DUTY, NO EXTRA CHARGES UK to USA Delivery, No Hassle, Directly from the manufacturer. UK to Australia & New Zealand Shipping: We will dispatch all Orders from Australia. NO HASSLE, NO TAX, NO DUTY, NO EXTRA CHARGES
Categories

Industrial BGA SSD – FerriSSD SM681G Series

Industrial BGA SSD: Silicon Motion FerriSSD SM681G Series (120GB to 960GB)

An industrial BGA SSD is the storage most engineers reach for when a design has no room for a connector and no tolerance for failure. The Silicon Motion FerriSSD SM681G series solders directly onto the board in a 16mm x 20mm package, runs on PCIe Gen4 x4 NVMe, and covers four capacities from 120GB up to 960GB. PonDesk stocks the full range for UK buyers, with each SKU built for the same wide-temperature, vibration-heavy conditions that rule out a standard consumer drive.

What Makes a BGA SSD Different From an M.2 or SATA Drive

A BGA SSD packs the NAND flash and controller into a single ball-grid-array chip that gets reflow-soldered straight onto the motherboard, rather than plugged into a slot. There's no connector to work loose under shock or vibration, no cable to route, and the footprint is a fraction of even the smallest M.2 2230 module. That makes it the go-to choice for embedded and edge systems where board space is tight and the drive has to survive years of continuous duty in a cabinet, a vehicle, or a factory floor panel.

Because it's soldered rather than socketed, a BGA SSD is not something you swap out later. Capacity and endurance need to be right at the design stage, which is why the FerriSSD range comes in graduated sizes rather than one-size-fits-all.

Silicon Motion FerriSSD SM681G Series: Key Features

Every capacity in the SM681G line shares the same controller platform and reliability stack, so the buying decision comes down to capacity and throughput rather than feature trade-offs.

Choosing the Right Capacity

Sequential read and write speed scale with capacity on this series, so the 120GB model suits light boot-and-log duty while the 960GB model is built for heavier data capture.

Model Capacity Sequential Read Sequential Write Typical Use
SM681GXD C8VPD 120GB 900 MB/s 80 MB/s OS boot drives, POS terminals, thin clients
SM681GXE C8VPE 240GB 1,900 MB/s 170 MB/s Industrial PCs, kiosks, edge gateways
SM681GXF C8VPF 480GB 3,900 MB/s 340 MB/s Machine vision, in-vehicle computers, HMI panels
SM681GXG C8VPG 960GB 5,600 MB/s 680 MB/s Data logging, AI edge inference, video capture at the edge

If you're replacing an existing design, match the current drive's capacity first and use the read/write figures above to confirm the new SM681G part meets or beats what the application already depends on.

Where Industrial BGA SSDs Get Used

The soldered, shock-resistant form factor turns up wherever a system has to run unattended for years without a technician nearby to swap a drive:

Why Buy Your FerriSSD From PonDesk

PonDesk sources the SM681G series directly and prices the full capacity range competitively for buyers, so you're not paying a distributor markup on a component you're likely to need in volume. Orders to UK addresses ship with free delivery, and the team can quote bulk and reseller pricing on request for production runs. If you're speccing a new design or replacing an end-of-life drive, PonDesk's team can help confirm the right SM681G capacity against your existing BOM before you commit to an order.

Is a BGA SSD upgradeable or replaceable later?

No. Because it's reflow-soldered to the board, a BGA SSD is fixed at build time. Capacity should be sized for the full product lifecycle rather than upgraded after deployment, which is why the SM681G range is offered across four capacities rather than one.

What temperature range does the FerriSSD SM681G support?

All four capacities carry the same -55°C to +85°C storage temperature rating, making the series suitable for outdoor cabinets, vehicle bays, and unheated industrial enclosures.

Does the FerriSSD SM681G support encryption?

Yes. Every SKU in the range includes AES-128/256 encryption with optional TCG Opal 2.0 compliance, so the drive can meet data-security requirements in regulated or security-sensitive deployments without an add-on controller.

Which capacity should I choose for an edge AI or video capture application?

The 480GB or 960GB models are the better fit, since their higher sequential write speed (340 MB/s and 680 MB/s respectively) handles continuous data capture better than the 120GB or 240GB variants, which are sized more for boot and light logging duty.

An industrial BGA SSD is a solid-state drive built as a single soldered BGA package rather than a socketed module, chosen for embedded and rugged systems where space, vibration resistance, and long-term reliability matter more than field-replaceable storage. The Silicon Motion FerriSSD SM681G series covers this need from 120GB to 960GB on a shared PCIe Gen4 NVMe platform.

🍪 Cookies Notice

We use cookies to ensure you get the best experience. See our Privacy Policy.