Many homes and small offices struggle with weak cellular signals. When the signal is low, video calls drop, apps load slowly, and you miss important alerts. This matters because you rely on a stable connection for work, school, and staying in touch with family. The Altice Labs 5G-A031F0-W00 4G-5G Indoor Picocell - All in One (AIO) fixes the problem by creating a strong indoor network that works with both 4G and 5G phones.
Altice Labs 5G-A031F0-W00 4G-5G Indoor Picocell - All in One(AIO) with Altice
Imagine a tiny box that turns a weak outdoor signal into fast, reliable Wi-Fi for every device in your house. That is what this picocell does. It receives the carriers signal and rebroadcasts it inside, so your phone, tablet, or laptop always has a strong link. If you have spotty coverage in the kitchen, bedroom, or conference room, you need this device to keep you connected without buying a new plan.
Key Features
-
- Internal antenna with up to 4 x 4 MIMO.
- Transmit power up to +24 dBm (250 mW) and EIRP up to 36 dBm.
- Operates on 4G n3 (1.8 GHz) and 5G n78 (3.6 GHz) bands.
- Supports 10 GbE SFP+ and optional GPON/XGS-PON modules.
- Network synchronization via PTP 1588v2, GNSS optional.
- Management via Netconf/YANG (O-RAN O1 interface).
- IPsec and CMPv2 security for encrypted tunnels.
- Power via 48 VDC jack or PoE++ on RJ45.
- LED indicators for run, sync, RF, and port status.
- Mounting options for ceiling, wall, or pole.
Specifications
| Equipment Size (HxWxD) |
234.4 x 234.4 x 82.5mm |
| Net Weight (kg/lb) |
3.10kg /6.83lb |
| Antenna Configuration |
Up to 4x4 |
| Transmit Power |
TX port: +24dBm(250mW) EIRP: up to 36dBm |
| Operation Bands |
4G - n3 (1.8GHz), BW up to 20MHz@FDD
5G - n78 (3.6GHz), BW up to 100MHz@TDD |
| Operation Capacity |
Up to 128 users |
| Antennas |
Internal |
| Synchronization |
PTP 1588v2, Network Listen and GNSS support (optional) |
| Management Plane |
Netconf/Yang (O-RAN O1 interface based) |
| Security |
IPsec and CMPv2 |
| Power |
DC Jack or PoE++ via RJ45 |
| Environmental Temperature |
-5ºC to +45ºC |
| Humidity |
5% to 95% of Relative Humidity range |
| Internet Protocol |
IPv4/IPv6; IPsec tunnel support; SFP+ 10GBE interface; SFP-ONU GPON/XGS-PON |
| Standards / Speci cations |
3GPP (3GPP TS 38.104, 3GPP TS 38.141-1/2, 3GPP TS 38.113, 3GPP TS 36.104, 3GPP TS 36.141)
ETSI (EN 301 908-1/14, EN 301 489-50)
Synchronization (ITU-T G.8271, ITU-T G.8273.2, IEEE 1588v2)
Safety & EMF (EN 62368-1, EN 50385)
Environmental (EN 300 019-1-3, IEC 60068-2-xx) |
| SFP |
1x SFP+ (10Gbps) |
| RST Switch |
Factory reset |
| DC Jack (2.5mm) |
Power supply input (48VDC ± 10%) |
| RJ45 |
10GbE and PoE++ input |
| Mounting Options |
Ceiling, wall and pole mount |
| LEDs |
1 RUN LED (green/red); 1 SFP LED (green); 1 RJ45 LED (green); 1 SYNC LED (green); 1 RF LED (green) |
