BlueOptics BOCR4 4-Channel, Singlemode, 1HE CWDM Multiplexer

Improve fiber capacity with the BlueOptics BOCR4-LU-LU, a 4-Channel CWDM solution designed to manage multiple optical wavelengths over compatible fiber infrastructure. It supports four CWDM channels across the 1270nm to 1330nm wavelength range with 20nm channel spacing. With LC/UPC connectors for both input and output, this optical multiplexer and demultiplexer provides a practical choice for network installations that need organized wavelength management and efficient use of existing fiber capacity.

BlueOptics BOCR4-LU-LU 4-Channel CWDM MUX/DEMUX

When your optical network needs to carry multiple wavelengths, using separate fiber paths for every service can increase infrastructure requirements. The BlueOptics BOCR4-LU-LU helps address this challenge by supporting four CWDM channels within a shared optical fiber system. Its 20nm channel spacing provides separation between supported wavelengths, while the ±6.5nm channel passband supports the specified CWDM operating range. The LC/UPC input and output connectors provide compatible interfaces for optical network equipment. With a polarization dependent loss of ≤0.3dB, this unit is designed for compatible CWDM applications where controlled optical performance is important.

Solution for Fiber to the X (FTTX)

BlueOptics passive 4 Channel Multiplexer/Demultiplexer as 19" chassis rack version for increasing the transmission capacity of optical data signals from 1270-1330nm in optical fiber connections by combining different wavelengths on one fiber. This allows different services to be combined on one connection. BlueOptics passive 4 Channel Multiplexers/Demultiplexers can be operated without power supply and are designed for maximum ranges on single-mode optical fibers.

Full Utilization of Your Fiber

BlueOptics passive Multiplexers bundle several optical signals and thus enable their transmission via one fiber (multiplexing). On the opposite side, these signals are unbundled again with a Demultiplexer in order to divide the signals again into several fibers (demulitplexing). This is done under consideration of the CWDM grid according to ITU G.694.2.

Best Attenuation Values

BlueOptics 4 Channel Multiplexers have best attenuation values because of a low input attenuation (Input Loss) and a high return loss (Return Loss). 4 Channel Multiplexers are primarily used in Fiber to the Home (FTTH) Networks, Fiber to the Point (FTTX) Networks, Passive Optical Networks (PON), Gigabit Passive Optical Networks (GPON), Local Area Networks (LAN) and Cable Television (CATV) installations or just for easy optical signal distribution.

Highest Component Quality

For lossless transmission services exclusively branded fibers from well known manufacturers such as Corning, Fujikura or YOFC are used in the production process of BlueOptics 4 Channel Multiplexer Solutions. All installed plugs are manufactured with highly reliable zirconia ceramic ferrule of brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massari and achieve a lifetime of up to 1500 mating cycles.

Interference-free Transmission

All BlueOptics 4 Channel Multiplexer Solutions are tested after production with interferometer and Optical-Time-Domain-Reflectometry (OTDR) to ensure the best quality. A measurement protocol of the input loss and return loss values is included with every shipped 4 Channel Multiplexer Rack Version.

BlueOptics 4 Channel Multiplexer solutions meet Telcordia GR-326 requirements-Core 4.4.

Industrial Standards

BlueOptics 4 Channel Multiplexers are manufactured to meet generally accepted industry standards and norms. All used cables are equipped with a flame-retardant LSZH jacket. In case of a fire thus creates a very low smoke emission in comparison to PVC coated cables. Furthermore no halogen is released.

BlueOptics 4 Channel Multiplexers meet the following Norms: IEC-61034, IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.

Act Now!

By using BlueOptics 4 Channel Multiplexer solutions networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics Fiber Optic 4 Channel Multiplexers you can improve your connections and reduce your OPEX and CAPEX.

Benefits

• Supports four channels: Allows four CWDM wavelengths to be managed within compatible optical fiber infrastructure.

• Efficient fiber use: Helps you carry multiple optical services without requiring a separate fiber path for each wavelength.

• Flexible wavelength management: Supports the 1270nm to 1330nm wavelength range with 20nm channel spacing.

• Easy connectivity: LC/UPC input and output connectors provide straightforward connections to compatible optical equipment.

• Controlled optical performance: PDL of ≤0.3dB helps maintain the specified polarization performance.

Usages

The BlueOptics BOCR4-LU-LU can be used in compatible CWDM optical networks where four wavelengths need to be managed through shared fiber infrastructure. It is suitable for telecom and data communication applications that require 4-channel CWDM connectivity. You can use it with compatible optical equipment that supports LC/UPC connections and the specified 1270nm to 1330nm wavelength range. Its wavelength management capabilities make it useful for network installations where available fiber capacity needs to be used more efficiently.

Key Features

• 4-channel CWDM

• Model BOCR4-LU-LU

• Standard Code (Cisco)

• 1270nm to 1330nm wavelength range

• 20nm channel spacing

• ±6.5nm channel passband

• ≤0.3dB polarization dependent loss

• LC/UPC input connector

• LC/UPC output connector

• RAL9004 black color

Description