Tired of confusing control panels that lag when you need fast response? The B&R 6PMT50.0702-19B Power Panel T50 Mobile HMI gives you a clear, rugged interface that lets you see and control your machines in real time. It is built for industrial environments where every amp of power matters, and a missed signal can stop production. This panel puts the right information at your fingertips, so you avoid costly downtime.
B&R 6PMT50.0702-19B Power Panel T50 Mobile HMI
In many factories the lack of a reliable amp monitoring interface forces operators to guess whether a motor is overloaded or a circuit is failing. That uncertainty leads to wasted material, extra wear, and safety risks. The B&R Power Panel T50 Mobile HMI removes that guesswork. Its built-in amp display, bright TFT screen and fast dual-core processor deliver instant feedback and precise control. You can set alarms, view trends, and act within seconds, keeping your line running smoothly and safely.
Usages of amp
The panel fits anywhere you need to watch amp consumption - on a production line, in a water-treatment plant, or on a mobile robot. Use it to monitor motor start-up currents, detect overloads on conveyors, or balance load on a battery bank. Its Ethernet port lets you link several panels together for a central dashboard, while the USB slot makes firmware updates quick. Whether the equipment is fixed or moving, the HMI gives you real-time amp data you can trust.
Benefits
- Immediate amp readout prevents motor damage and reduces unexpected stops.
- Bright 7-inch screen stays clear even in bright factories.
- Touch-screen controls let you change settings without extra buttons.
- Built-in buzzer and LED alerts warn you the moment a limit is exceeded.
- Rugged IP66 housing survives dust, water and temperature swings.
Specification
| Status LED |
1x red/green (configurable, dimmable), 2x red/green/blue (configurable, dimmable) |
| Buzzer |
Yes |
| Brightness Sensor |
Yes |
| Controller OS |
PPT50 system |
| Processor |
ARM Cortex-A9, dual-core, 800 MHz |
| Flash |
512 MB |
| DRAM |
1 GB |
| Display Type |
TFT color |
| Display Diagonal |
7.0" |
| Colors |
16.7 million (RGB, 8 bits per channel) |
| Resolution |
WVGA, 800 x 480 pixels |
| Contrast |
Rev ≥ C3: Typ. 550:1, Rev < C3: Typ. 600:1 |
| Viewing Angles |
Horizontal L/R: 70°, Vertical U/D: Rev ≥ C3: 50°, Rev < C3: 60° |
| Backlight Type |
LED |
| Brightness |
Typ. 500 cd/m², dimmable |
| Half-brightness Time |
50,000 h |
| Touch Screen Type |
Multi-touch, PCT (projected capacitive), chemically hardened glass (6H), screen rotation: Yes |
| Interface IF1 |
Ethernet, M12 D-coded, 10/100 Mbit |
| Interface IF3 |
USB 2.0, multi-header, max 0.5 A |
| Digital Inputs |
8 channels, 12/24 VDC, 9–32 VDC, sink, hardware filter 20 ms, input current Typ. 1.3 mA (12V), Typ. 2.5 mA (24V), switching threshold 50% supply voltage |
| Digital Outputs |
4 channels, source (current-sourcing FET), 12/24 VDC, max 0.5 A, overload/short-circuit protection, status display via read-back, RDS(on) max 100 mΩ, residual voltage <0.1 V |
| Electrical Properties |
Nominal voltage 12/24 VDC, max power consumption 10.5 W, reverse polarity protection: Yes, short-circuit proof: Yes |
| Mounting Orientation |
Any |
| Degree of Protection |
IP66 |
| Operating Temperature |
-20 to +70°C (housing surface) |
| Storage/Transport Temperature |
-20 to 80°C |
| Front Design |
Black |
| Dimensions |
Width 198 mm, Height 141 mm, Depth 53.15 mm |
| Weight |
963 g |
