| Radios |
2.4 GHz 802.11b/g/n/ax client access radio |
| 5 GHz 802.11a/n/ac/ax client access radio |
| 6 GHz 802.11ax client access radio |
| 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio |
| 2.4 GHz Bluetooth Low Energy radio with beacon and scanning support concurrent operation of all five radios |
| Antenna |
Integrated omni-directional antennas (4.5 dBi gain at 2.4 GHz, 5.5 dBi gain at 5 GHz, and 5.5 dBi gain at 6GHz) |
|
| 802.11ax, 802.11ac Wave 2 and 802.11n capabilities |
DL-OFDMA, TWT support, BSS coloring* |
| 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 6 GHz |
| 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 5 GHz |
| 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 2.4 GHz |
| SU-MIMO, UL and DL MU-MIMO support |
| Maximal ratio combining (MRC) & beamforming |
| 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax |
| Note: *40MHz channels are supported only in 5 & 6 GHz bands. |
| Up to 1024-QAM on all three - 2.4 GHz, 5 GHz, and 6 GHz bands |
| Packet aggregation |
| Power |
Power over Ethernet: 42.5 - 57V (PoE+ and 802.3bt compliant) |
| Alternative 54V DC input via DC adapter |
| Power consumption: 30W to 40W (802.3bt) |
| Minimum power requirement: 30W (PoE+, USB is disabled) |
| Maximum power consumption: 40W |
| Power over Ethernet injector and DC adapter sold separately. |
| Note: Actual power consumption may vary depending on the AP usage. |
| Interfaces |
2x 100/1000/2.5G/5G BASE-T Ethernet (RJ45) |
| 1x DC power connector (5.5 mm x 2.5 mm, center positive) |
| Mounting |
All standard mounting hardware included (AIR-AP-BRACKET-2) |
| Desktop, ceiling, and wall mount capable |
| Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes |
| Physical Security |
Kensington lock slot |
| Concealed mount plate with anti-tamper cable bay |
| Environment |
Operating temperature: 32 °F - 104 °F (0 °C - 40 °C) |
| Humidity: 5% to 95% non-condensing |
| Reliability |
Mean time between failure (MTBF): 998,440 hrs at +25° C operating temperature |
|
| Physical Dimensions |
260 mm x 260 mm x 56 mm, including desk-mount feet or mount plate |
| Weight: 1.7 kg |
| Security |
Integrated layer 7 firewall with mobile device policy management |
| Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal |
| Flexible guest access with device isolation |
| VLAN tagging (802.1q) and tunneling with IPsec VPN |
| PCI compliance reporting |
| WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal*, WPA3 - Enterprise*, WPA3 - Enhanced Open (OWE)* |
| EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM |
| TKIP and AES encryption |
| Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration |
| Cisco ISE integration for guest access and BYOD posturing |
| Mobility |
PMK, OKC, and 802.11r for fast layer 2 roaming |
| Distributed or centralized layer 3 roaming |
| Analytics |
Embedded location analytics reporting and device tracking |
| Global layer 7 traffic analytics reporting per network, per device, and per application |
| LED Indicators |
One power/booting/firmware upgrade status |
|
| Regulatory |
RoHS |
| For additional country-specific regulatory information, please contact Meraki sales |
