When a generator or marine control system needs remote connectivity and location information, adding a separate communication gateway can increase installation space and wiring. The ComAp CM-4G-GPS-V2 combines cellular communication and GNSS capability in a compact plug-in module, allowing compatible control systems to add wireless connectivity and positioning without requiring a separate communication device.
ComAp CM-4G-GPS-V2, 4G & GPS Plug-in Communication Module
The ComAp CM-4G-GPS-V2 is a plug-in communication module designed to provide 4G cellular and GPS/GNSS connectivity for compatible ComAp control systems. Its compact 73.8 × 50.3 × 15 mm form factor and approximately 35 g weight make it suitable for installations where space is limited. The module operates from 8-36 V DC and has typical power consumption of 1.7 W, with peak power consumption of 10 W.
The module supports multiple cellular generations and frequency bands through the PLS63 platform. It supports 2G GPRS/EDGE, 3G UMTS/HSPA, 4G LTE-FDD, and 4G LTE-TDD bands. This broad cellular support allows the communication module to operate across a wide range of supported mobile networks and frequencies.
For antenna connectivity, the module provides SMA female interfaces and supports an active antenna. The GNSS section includes a 2.8 V / 20 mA antenna interface, while the cellular configuration provides two SMA female interfaces for Main and Diversity connections. These interfaces support the external antenna connections required for wireless communication and positioning.
The CM-4G-GPS-V2 is designed for industrial operating conditions, with an operating temperature range of -30 ˚C to +70 ˚C and storage temperature from -40 ˚C to +80 ˚C. Its low power requirements and compact construction make it practical for integration into control cabinets and equipment where continuous communication is required.
Key features
- Wireless Internet connection via cellular modem
- AirGate support
- Global 4G (LTE) module with 3G/2G backup
- Tracking via GNSS module
- WebSupervisor support
- Active e-mails and SMS support
- Internet connection via cellular network
- Built-in 4G (LTE) cellular modem
- Built-in GNSS (GPS, GLONASS) module for device tracking
Specifications
| General |
|
| Width × Height × Depth |
73.8 × 50.3 × 15 |
| Weight |
~35 g |
| Power supply |
8-36 V DC |
| Power consumption |
1.7 W |
| Peak power consumption |
10 W |
| Operating temperature |
-30 ˚C to +70 ˚C |
| Storage temperature |
-40 ˚C to +80 ˚C |
| GNSS |
|
| Antenna interface |
SMA female, 2.8 V / 20 mA |
| Antenna type |
Active |
| Supported networks and frequency bands (PLS63) |
|
| 2G (GPRS/EDGE) |
850,900,1800,1900MHz |
| 3G (UMTS/HSPA) |
Bd1 (2100MHz), Bd2 (1900MHz), Bd3 (1800MHz), Bd4 (2100MHz), Bd5 (850MHz),
Bd6 (850MHz), Bd8 (900MHz), Bd19 (850MHz)
|
| 4G (LTE-FDD) |
Bd1 (2100MHz), Bd2 (1900MHz), Bd3 (1800MHz),
Bd4 (2100MHz), Bd5 (850MHz), Bd7 (2600MHz), Bd8 (900MHz), Bd12
(700MHz), Bd13 (700MHz), Bd18 (850MHz), Bd19 (850MHz), Bd20
(800MHz), Bd26 (850MHz), Bd28 (700MHz), Bd66 (2100MHz)
|
| 4G (LTE-TDD) |
Bd38 (2600MHz), Bd40 (2300MHz), Bd41 (2500MHz) |
| Antenna interface |
2x SMA female (Main and Diversity |
| Certificates and standards |
|
| Certificates |
EN IEC 61000-6-2:2019
EN IEC 61000-6-4:2019
ETSI EN 301 489-1:2017
EN 60068-2-1:2007
EN 60068-2-2:2007
EN 60068-2-6:2008
EN 60068-2-27:2010
EN 60068-2-30:2005 25/55°C, RH 95%, 48hours
EN 18031-1:2024
UL 6200 |
