When a generator or industrial controller needs a reliable wired Internet connection for remote monitoring, adding a separate network device can increase wiring and cabinet space. The ComAP CM3-Ethernet provides Ethernet connectivity as a plug-in communication module, allowing compatible control systems to connect to network services and remote monitoring platforms.
ComAP CM3-Ethernet Internet / Ethernet Plug-in Communication Module
The ComAP CM3-Ethernet is a plug-in communication module designed to provide Internet connection through an Ethernet network. It uses a wired Ethernet connection and provides a 100 Mbit/s full-duplex interface through an RJ45 socket. This gives compatible ComAp control systems a straightforward way to connect to an existing wired network.
The module supports AirGate 2 and WebSupervisor, enabling remote monitoring and communication through supported ComAp services. It also supports active e-mails, which can be used for sending system information or notifications through the connected network. These features make the module useful when remote access and status communication are required.
For local monitoring and integration, the CM3-Ethernet supports Modbus and SNMP protocols. This allows compatible monitoring systems and network management applications to communicate with the connected controller through the Ethernet network without requiring a separate communication module.
The module is compact, measuring 73.8 × 50.3 × 21 mm and weighing approximately 30 g. It operates from an 8-36 V DC supply with typical power consumption of 1 W and peak power consumption of 2 W. Its compact plug-in construction helps keep the communication hardware integrated with the compatible controller.
The CM3-Ethernet is designed for industrial operating conditions, with an operating temperature range of -40 ˚C to +70 ˚C and storage temperature from -40 ˚C to +80 ˚C. It also meets specified EMC, environmental, and UL standards, making it suitable for wired communication and remote monitoring applications in compatible ComAp control systems.
Key features
- Wired Internet connection via Ethernet port
- 100 Mbit/s full-duplex Ethernet communication
- RJ45 Ethernet socket
- AirGate 2 support
- WebSupervisor support
- Active e-mails
- Modbus and SNMP protocols for local monitoring
- Compact plug-in communication module
Specifications
| Key features |
|
| Internet connection |
via Ethernet network |
| Wired Internet connection |
via Ethernet port |
| AirGate 2 |
support |
| WebSupervisor |
support |
| Active e-mails |
|
| Modbus, SNMP protocols |
for local monitoring |
| General |
|
| Width × Height × Depth |
73.8 × 50.3 × 21 |
| Weight |
~30 g |
| Power supply |
8-36 V DC |
| Power consumption |
1 W |
| Peak power consumption |
2 W |
| Operating temperature |
-40 ˚C to +70 ˚C |
| Storage temperature |
-40 ˚C to +80 ˚C |
| Ethernet port |
|
| |
100 Mbit/s, full duplex |
| |
RJ45 socket |
| Certificates and standards |
|
| |
EN 61000-6-2 |
| |
EN 61000-6-4 |
| |
EN 60068-2-1, EN 60068-2-2 |
| |
EN 60068-2-6 ed.2:2008 |
| |
EN 60068-2-27 ed.2:2010 |
| |
EN 60068-2-30:2005 25/55°C, RH 95%, 48hours |
| |
UL 6200 |
