When you have to tighten many small screws, your hand gets tired and the torque can be uneven. Inconsistent torque can damage delicate electronics or leave a joint loose, which leads to failures later. The Delta Electronics ECM-SD3-F12S0 smart screwdriver removes the guesswork. It gives precise, repeatable torque and speeds up the job, so you finish faster and with confidence.
Delta Electronics ECM-SD3-F12S0, 38VDC 6.35mm Transducerized Smart Screwdriver with Delta
Imagine a tool that knows exactly how much force to apply, every time you turn a screw. The Delta Electronics ECM-SD3-F12S0 is a transducerized smart screwdriver designed for technicians, hobbyists, and anyone who works with tight spaces. It runs on 38 VDC, fits a 6.35 mm hex bit, and reports torque in real time on an easy-to-read display. The built-in battery lasts through a full day of work, and the bit holder swaps quickly without tools. If you have ever stripped a head or over-tightened a connector, this device saves you from costly re-work.
Key Features
- Input voltage: 38 VDC for strong, consistent power.
- Torque range: 2.4-12 kgfcm for fine adjustments.
- Precision: 3 % for accurate tightening.
- Maximum speed: 2,000 rpm for rapid operation.
- Tool length: 268.5 mm for better reach.
- Handheld diameter: 34 mm for ergonomic grip.
- 6.35 mm hexagon bit (1/4") compatible with standard accessories.
- Humidity tolerance: 0-90 % RH non-condensing for varied environments.
Specifications
| Model |
ECM-SD3-F12S0 |
| Product Type |
Transducerized Smart Screwdriver |
| Input Voltage |
38 VDC |
| Torque Range |
2.4–12 kgf·cm |
| Precision |
±3% |
| Max. Rotation Speed |
2,000 rpm |
| Tool Length |
268.5 mm |
| Weight |
560 g |
| Handheld Diameter |
34 mm |
| Bit Specification |
6.35 mm Hexagon bit (1/4") |
| Operating Temperature |
0 to 40°C |
| Storage Temperature |
0 to 60°C |
| Humidity |
0–90% RH (non-condensing) |
| IP Rating |
IP40 |
