If you need motion control that never misses a step, the Delta Electronics PCI-DMC-B01 Advanced DMCNET Motion Control Card is the answer. This card connects your PC to up to twelve servo drives and lets you command them with millisecond precision. Engineers often struggle with jitter, limited axes, and hard-to-configure networking. Without a reliable controller, machines run slower, produce errors, and cost more to maintain. This card removes those obstacles and gives you a smooth, dependable link between software and hardware.
Delta Electronics PCI-DMC-B01 Advanced DMCNET Motion Control Card
The card solves the problem of fragmented motion control in complex automation projects. When a system cannot synchronize many axes, the whole process slows down and errors increase. This matters because downtime directly hurts productivity and profit. The PCI-DMC-B01 provides a single, Ethernet-based network that can handle up to twelve modules, offering consistent timing, easy parameter setting, and built-in safety I/O. By using the card, you get a clear, scalable solution that keeps every motor moving exactly as you program it.
Key Features
- PCI version 2.2, supports 32-bit, 3.3 V/5 V operation.
- Half-duplex RS-485 with transformer isolation for noise-free communication.
- Category 5e STP Ethernet cable, 24 AWG, 4-pair for reliable data.
- 35 homing modes configurable via DMCNET software.
- Linear, arc, helical and continuous interpolation modes.
- 1 isolated digital input, 1 isolated digital output, both 24 VDC.
- 2 isolated encoder inputs (EA/EB) for high-resolution feedback.
- Two high-speed compare outputs (200 kHz single-ended, 3.6 kHz differential).
- Supports VB, VC, BCB, Delphi, C#, VB.NET programming.
- Power consumption +5 VDC at 0.5 A typical, low heat generation.
- Maximum of 12 slave modules, each up to 30 m away.
Specifications
| Model Name |
PCI-DMC-B01 |
| Supporting Module |
Delta ASDA-A2-F Type Servo Drive |
| Homing Mode |
35 types (Parameter Setting via DMCNET) |
| Velocity Profiles |
T-curve, S-curve |
| Interpolation Mode |
Linear, Arc, Helical and Continuous |
| Ring |
1 Ring |
| Supporting Languages |
VB, VC, BCB, Delphi, C#, VB.NET |
| Communication Cable |
Category 5e STP Ethernet Cable (24AWG/4Pairs) |
| Communication Distance |
Max. 30 m (12 slave modules) |
| Communication Interface |
Half Duplex RS-485 with Transformer Isolation |
| PCI Specifications |
ver.2.2, supports 32-bit, 3.3 V/5 Vdc operation |
| Power Consumption |
+5Vdc at 0.5 A typical |
| Environment |
Operating Temperature: 0°C ~ 50°C; Storage Temperature: -20°C ~ 70°C; Humidity: 5 ~ 95% (Non-condensing) |
| Maximum Axes |
12 |
| Maximum Number of Modules |
12 |
| Digital Input |
1-CH isolated, SINK/SOURCE type, 24VDC (5mA/CH) |
| Digital Output |
1-CH isolated, Sink type, 24VDC (100mA/CH) |
| Encoder Inputs |
2-CH isolated, EA / EB |
| Compare Output Signal |
2-CH single-ended high speed compare, CMP, Max: 200K; 2-CH differential table compare, CMP, Max: 3.6K |
