| CPU |
|
| Processor |
TDP boot mode in BIOS setting: nominal (15W)
Core i7-1185GRE, base frequency 1.8GHz/ 2.8GHz, 4c, 12 MB Intel® Smart Cache (VTC 7260-7)
|
| Graphics |
|
| GPU |
Intel® Iris® Xe Graphics |
| Graphics Frequency |
1.3GHz |
| Maximum Resolution (HDMI) |
4096 × 2304 @ 60Hz |
| DirectX Support |
12.1 |
| OpenGL Support |
4.6 |
| Memory |
|
| Memory Type |
DDR4-3200 SO-DIMM |
| Memory Slots |
2 × SO-DIMM |
| Default Memory |
4GB + 4GB |
| Maximum Memory |
64GB |
| ECC Support |
In-band ECC, Dual-channel |
| Storage |
|
| 2.5" Drive Bay |
1 × SSD (15mm height) |
| mPCIe Storage |
1 × mPCIe for mSATA (SATA 3.0) |
| M.2 Storage |
1 × M.2 2242/2280 Key M NVMe SSD (PCIe 4.0 ×4), Optional Hailo AI card |
| Expansion |
|
| Mini PCIe |
1 × Mini PCIe (PCIe 3.0/USB 3.2 + USB 2.0), supports 2 × Micro SIM |
| M.2 Key B |
1 × M.2 3042/3052 (USB 3.2), supports 2 × Micro SIM |
| M.2 Key E |
1 × M.2 2230 (PCIe 3.0 ×2 & USB 2.0), Optional Wi-Fi or Hailo AI card |
| Display Interfaces |
|
| HDMI |
1 × HDMI 2.0a/b, up to 3840 × 2160 @ 60Hz |
| VGA |
1 × VGA, up to 2560 × 1600 @ 60Hz |
| DisplayPort |
1 × DP, up to 4096 × 2304 @ 60Hz |
| Networking |
|
| 2.5Gb Ethernet |
2 × Independent 2.5GbE (RJ45), Intel® I225-IT |
| Jumbo Frame |
9K Byte |
| PTP |
IEEE 1588 Support |
| Gigabit Ethernet |
1 × Independent GbE (RJ45) |
| vPro Support |
Yes (iAMT) |
| Wake-on-LAN |
Supported |
| USB |
|
| USB 3.2 Gen1 |
3 × USB 3.2 Gen1 Type-A |
| USB 2.0 |
1 × USB 2.0 Type-A |
| Serial Interfaces |
|
| RS232/422/485 |
2 × Selectable |
| RS232 |
1 × Standard, 1 × Wafer-type Reserved |
| Security |
|
| TPM |
Infineon SLB9670VQ2.0 FW7.62 (TPM 2.0) |
| Audio |
|
| Audio Output |
Stereo Line-out |
| Audio Input |
Stereo MIC-in |
| Line-in |
Reserved (Wafer Connector) |
| Sensors |
|
| MEMS Sensor |
3D Accelerometer & 3D Gyroscope |
| Sensor Controller |
ST LSM6DSLTR |
| Digital I/O |
|
| Digital Input |
4-bit |
| Digital Output |
4-bit |
| CAN Bus |
|
| CAN Interface |
1 × CAN 2.0A / 2.0B |
| CAN Isolation |
2.5kV |
| GNSS |
|
| GNSS Module |
U-blox NEO-M9N |
| Supported Systems |
GPS, GLONASS, QZSS, Galileo, BeiDou |
| Dead Reckoning |
Optional (NEO-M8U / NEO-M8L) |
| Power |
|
| Input Voltage |
9–36V DC |
| Cranking Voltage |
6–9V (Less than 20 seconds) |
| Protection |
OCP & UVP (Shutdown above 37V) |
| Ignition Control |
Ignition On/Off with Programmable Delay Timer |
| Remote Power Control |
Optional |
| Front I/O |
|
| Buttons |
ATX Power, Reset |
| LED Indicators |
9 |
| VGA |
1 × DB15 |
| COM Ports |
2 × DB9 (RS232/422/485) |
| Multi-port |
1 × DB15 (4×DI, 4×DO, CAN, DR Signal) |
| External Port |
1 × DB15 (Reserved) |
| GNSS Antenna |
1 × RP-SMA |
| WLAN Antennas |
4 × RP-SMA |
| Rear I/O |
|
| Audio |
Line-out & MIC-in |
| USB |
3 × USB 3.2 Type-A, 1 × USB 2.0 Type-A |
| Video Outputs |
HDMI ×1, DP ×1 |
| PoE+ |
4 × 2.5GbE RJ45 |
| Serial |
1 × RS232 (DB9) |
| Ethernet |
1 × GbE RJ45 |
| Power Connector |
9–36V DC (3-pin Phoenix) |
| WWAN Antennas |
4 × SMA |
| Reserved Antenna Holes |
4 |
| Side I/O |
|
| SIM Slots |
2 × SIM Slots (SIM1-1, SIM2-1) |
| Mechanical |
|
| Dimensions (Without Brackets) |
210 × 173 × 75mm |
| Dimensions (With Brackets) |
234 × 173 × 81mm |
| Weight |
3.5kg |
| Operating Environment |
|
| Operating Temperature |
-30°C to +65°C / +70°C (15W / 12W TDP) |
| Storage Temperature |
-40°C to +85°C |
| Humidity |
10–95% RH, Non-condensing |
| Vibration & Shock |
|
| Operating Vibration |
MIL-STD-810H 514.8C Procedure 6 Category 4; IEC 60068-2-64: 2.0g @ 5–500Hz |
| Storage Vibration |
MIL-STD-810G 514.6E Procedure 1 Category 24, 7.7g |
| Shock |
MIL-STD-810G 516.6 Procedure I (40g); Procedure V Crash Hazard (75g) |
| Certifications |
|
| Certifications |
CE, FCC Class A, UKCA, E13 |
| Operating System Support |
|
| Windows |
Windows 10 (64-bit), Windows 10 IoT (64-bit), Windows 11 |
| Linux |
Ubuntu 18.04 |
| Optional Accessories |
|
| External Cable |
DB15 Multi-port Adapter Cable, 20cm |
