Omnitron 8860-0, 4 Channel iConverter CWDM Dual Fiber Multiplexer

The iConverter® CWDM/X 8860-0 is a 4-Channel MUX/DEMUX designed to help you combine and separate multiple optical signals over a single-mode fiber network. With four ITU center wavelengths of 1471, 1491, 1591, and 1611 nm, this optical multiplexer/demultiplexer provides a practical way to manage multiple CWDM channels. It uses LC UPC connectors and supports protocol and rate transparency up to 10Gbps. If you need to organize multiple optical channels while keeping your fiber infrastructure simple, this CWDM/X MUX/DEMUX provides a compact solution for your network.

Omnitron iConverter® CWDM/X 4 and 8 Channel Multiplexer/Demultiplexer

Managing several optical signals can require additional fiber infrastructure and equipment. The iConverter® CWDM/X 4 and 8 Channel Multiplexer/Demultiplexer helps reduce this complexity by combining supported wavelengths for transmission and separating them at the receiving side. The 4-channel model uses 20 nm CWDM channel spacing and supports a common port operating wavelength range of 1270–1610 nm. Its single-mode 9/125μm fiber compatibility makes it suitable for supported CWDM optical networks. With insertion loss below 1.9 dB, adjacent channel isolation above 30 dB, and non-adjacent channel isolation above 40 dB, it provides the optical characteristics needed for reliable channel management.

Benefits

• Multiple channel management: Combine or separate four optical channels within a CWDM network.

• Flexible wavelength support: Uses four ITU center wavelengths for organized optical transmission.

• Low insertion loss: Less than 1.9 dB insertion loss helps maintain optical signal performance.

• Compact design: The 0.85" × 4.5" × 2.8" size fits space-conscious network installations.

• Wide operating options: Commercial and wide temperature ranges support different deployment environments.

Usages

The iConverter® CWDM/X 8860-0 can be used in single-mode CWDM optical networks where multiple wavelengths need to share fiber infrastructure. It is suitable for telecom and data communication applications requiring 4-channel optical multiplexing and demultiplexing. You can use it with supported network equipment that requires LC UPC connectivity and transmission rates up to 10Gbps. Its dual-fiber channel and common ports support optical network designs that use separate transmit and receive fibers.

Key Features

• iConverter® CWDM/X 4 and 8 Channel Multiplexer/Demultiplexer

• Model 8860-0

• 4-channel MUX/DEMUX

• LC UPC connectors

• 1471, 1491, 1591, 1611 nm wavelengths

• Single-mode 9/125μm fiber

• 20 nm CWDM channel spacing

• Protocol/rate transparency up to 10Gbps

• Insertion loss below 1.9 dB

• Adjacent channel isolation above 30 dB

• Non-adjacent channel isolation above 40 dB

Specifications: