Planet ISW621TF 6G 4x10/100 +2 SFP DIN rail mountable Switch

Network failures in remote factories or traffic control cabinets often stem from harsh temperatures and limited cable runs. The Planet ISW621TF 6G 4x10/100 +2 SFP DIN rail mountable Switch is a rugged industrial Ethernet switch that keeps your devices connected even in -40 °C to 75 °C environments, extending fibre links up to 60 km. It gives you a reliable, compact solution for long-distance, high-interference sites, helping you avoid costly downtime.

Why Planet ISW621TF 6G 4x10/100 +2 SFP DIN rail mountable Switch Is the Answer to Industrial Connectivity Challenges

Industrial networks must survive extreme heat, cold and electrical noise while still delivering stable data links. When a switch cannot cope, you lose control of production lines, surveillance feeds or traffic signals, leading to safety risks and lost revenue. The Planet ISW621TF 6G 4x10/100 +2 SFP DIN rail mountable Switch is built to thrive in those conditions. Its hardened enclosure, wide operating temperature range and dual-redundant power inputs protect against surges and EMI, while the built-in SFP slots let you stretch connections far beyond typical copper limits. This combination solves the reliability problem without requiring extra equipment or complex wiring.

Usages of Planet ISW621TF 6G 4x10/100 +2 SFP DIN rail mountable Switch

Ideal for any setting where durability and distance matter.

• Factory floor networking where temperature swings and electrical interference are common.
• Railway signalling cabinets that need long-range fibre links to central control.
• Outdoor surveillance stations requiring up to 60 km of single-mode fibre.
• Traffic management enclosures on curbsides exposed to weather and power spikes.
• Remote oil-field monitoring rigs where space is limited and power sources vary.

Key Features of Planet ISW621TF 6G 4x10/100 +2 SFP DIN rail mountable Switch

• Operating Temperature Range: -40 °F to 167 °F. Works reliably in extreme cold and heat.
• Power Input: DC 12 - 48 V. Accepts a wide span of voltages for global installations.
• Power Consumption: 16 Watt. Keeps energy use low while delivering full performance.
• Ports: 4 x 100Base-TX RJ-45 and 2 x 100Base-FX SFP. Provides both copper and fibre connectivity.
• Switching Capacity: 1.2 Gbit/s. Handles traffic from all six ports without bottlenecks.
• MAC Address Table: 2048 entries. Supports a sizable number of devices on the network.
• Dimensions (H × W × D): 1.3 in × 5.3 in × 3.8 in. Fits neatly on DIN rails or walls.
• Weight: 15.59 oz. Light enough for easy mounting yet solidly built.
• Standards Compliance: IEEE 802.3, 802.3u, 802.3x, IP30, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, FCC Part 15 A. Meets industry safety and performance criteria.
• Features: Auto-MDI/MDI-X, full/half duplex, store-and-forward, 6 kV ESD protection, auto-negotiation. Simplifies setup and safeguards against electrical spikes.

Benefits of Planet ISW621TF 6G 4x10/100 +2 SFP DIN rail mountable Switch

You gain peace of mind knowing the switch will operate flawlessly in severe climates, reducing maintenance trips and unexpected outages. The ability to run fibre for up to 60 km means you can connect distant cameras or sensors without adding repeaters, cutting both cost and complexity. Dual-redundant power inputs ensure continuous operation even if one supply fails, supporting critical systems that cannot afford downtime. Its compact DIN-rail design saves valuable cabinet space, allowing you to pack more functionality into tight enclosures. Finally, the built-in protection against EMI and surges shields your network hardware, extending its lifespan and protecting your investment.

Specifications