Remote monitoring IP camera recorder for warehouse/factory automation
This product is an IP camera recorder that can record various events at once using up to four cameras, such as malfunctions occurring on automated equipment or production lines operating in factories and warehouses. With the combination of RM-100RC and pre-configured IP camera from us, you can start recording immediately after connecting the camera. A digital input can trigger pre-/post-trigger recording to allow more efficient remote monitoring. In addition, the RM-100RC allows you to check recorded video and monitor the system from a Wi-Fi devices such as a tablet or a laptop by using the RM-100RC as the access point.
Features & Benefits:
Easy to get started
Simply connect the RM-100RC to pre-configured cameras from Silex, and turn on the power to start continuous recording. The RM-100RC's POE-enabled IP camera interfaces provide the power supply to IP PoE IP cameras.
The RM-100RC can be used with other IP cameras selected by the customers. Refer to the brochure for recommended camera specifications.
Various use case support
The RM-100RC features two recording modes, continuous recording and trigger recording, and display options, multi display mode and single display mode. You can configure the RM-100RC to fit with your needs.
Recorded data upload over the Network
The RM-100RC can upload the recorded data to your Windows server over the network by SMB protocol. You will be able to integrate monitored data into your monitoring application.
Wi-Fi 6 Access Point to let you get video data from your Wi-Fi devices
You can access streaming data as well as the recorded data from your Wi-Fi device such as a tablet or a laptop computer by setting the RM-100RC as the Wi-Fi 6 access point.
AMC Mesh support
The RM-100RC supports AMC Mesh, Silex's proprietary tree-topology mesh network. Up to 16 devices can join the mesh network, which can be combined with other Silex access points that support AMC Mesh. The RM-100RC can create overlayed Wi-Fi infrastructure without wire installation by the mesh network.
Specifications:
| Product Name |
RM-100RC |
| Wireless LAN |
Wi-Fi 6 (2.4 GHz / 5 GHz) |
| Security |
Authentication: Open, WPA2-PSK, WPA2-Enterprise, WPA3-PSK, WPA3-Enterprise
Encryption: AES
|
| Wired LAN |
RJ-45 × 1 (100BASE-TX / 1000BASE-T) |
| Device Interfaces |
IP Camera: RJ-45 × 4 (100BASE-TX, PoE power supply)
Digital Input × 4
Digital Output × 2
Vin DC 5–24V (*1)
GND
|
| Switch |
×1 |
| LED |
×5 |
| Operating Condition |
Temperature: -20°C to 50°CHumidity: 20% – 80% RH |
| Storage Condition |
Temperature: -30°C to 70°CHumidity: 20% – 90% RH |
| Power |
DC connector: 24V–48V (*2)AC adapter port: 24V (*3) |
| Size |
230 × 142 × 40 mm |
| Weight |
920 g |
| Max Power Consumption |
24 W (including ~10 W from 4 cameras total) |
Note:
*1: Please use the same DC as the power supply.
*2 Please use JST JFA connector J300 series F32FSS-02V-KX.
*3 This product does not include an AC adapter. If you wish to use the AC adapter, please purchase the optional item separately.
Video Recording Function:
| Compatible Browser |
Microsoft Edge |
| Supported OS |
Windows (operation confirmed) |
| Maximum Sessions |
2 simultaneous sessions |
| Resolution |
HD (or Full HD *4) |
| Frame Rate |
30 fps |
| Bit Rate |
Up to 3 Mbps |
| Video Format |
H.264 |
| Communication Protocol |
RTP (between RM-100RC body and camera) |
| Recording Method |
Always / Event (trigger input) |
| Storage Method |
Multi (up to 4) / Single |
| Storage Capacity |
Approx. 200 GB (≈ 7 days with HD camera + continuous + multi recording *5) |
| File Transfer |
SMB (file sharing with Windows PC) |
| Notes |
*4 When using Full HD camera, number of cameras depends on storage method;
cannot be used simultaneously with HD camera*5 Estimated capacity based on 2 Mbps bitrate
|
