Ubiquiti PowerBeam AC ISO Gen2 Network Bridge 450Mbps 25dBi White

Struggling with unreliable point-to-point links? You need a bridge that cuts interference and keeps your data flowing. The Ubiquiti PowerBeam AC ISO Gen2 delivers rock-solid 450 Mbps performance even in crowded spectrum.

Ubiquiti PowerBeam AC ISO Gen2 Network Bridge 450Mbps 25dBi White

Designed for demanding outdoor deployments, this 5 GHz airMAX® ac bridge combines a 25 dBi directional antenna with an integrated RF isolator. The isolator filters out nearby signals, so you get cleaner airwaves and lower latency. Powered by Ubiquiti’s custom airMAX engine, the device accelerates TDMA scheduling, giving you higher throughput and better scalability on a single 24 V PoE source.

The metal-plated rear housing adds extra RF shielding, protecting the radio from environmental noise. With support for 16-QAM up to 256-QAM modulation, the bridge adapts to changing link conditions, maintaining stable speeds from 450 Mbps down to lower rates when needed. An intuitive web interface lets you monitor signal strength, LAN activity, and power usage in real time, while QoS support prioritizes critical traffic.

Built to survive harsh weather, the unit operates from -40 °C to 70 °C and tolerates 95 % humidity. Its 64 MB internal memory stores configuration backups, and surge protection safeguards the device against lightning strikes. The single RJ-45 Ethernet port delivers gigabit connectivity to your router or switch, making integration simple and fast.

Benefits

You gain a high-gain, interference-immune link that can span several kilometers without sacrificing speed. The integrated isolator means fewer dropped packets and smoother video or VoIP streams. Because it runs on PoE, installation requires only one cable for power and data, reducing mounting time and cable clutter.

Features

• 450 Mbps max throughput
• 25 dBi high gain antenna
• Integrated RF isolator
• AirMAX ac TDMA engine
• PoE powered, 8.5W max
• Metal housing with shielding
• 64 MB internal memory
• One RJ-45 Ethernet port

Usage

Mount the PowerBeam AC ISO on a pole or roof, aim the dish toward the partner bridge, and power it via PoE injector or switch. After a quick alignment using the LED signal indicator, the device negotiates the optimal modulation scheme and locks in a stable link. Ideal for extending ISP service to remote sites, connecting campus buildings, or linking surveillance cameras across a campus.

Specifications