Tired of weak signals and messy cables? Your rooms need reliable Wi-Fi without a cluttered setup. The Ubiquiti UAP AC In Wall turns a simple wall jack into a high-speed hotspot, solving dead zones fast.
Ubiquiti UAP AC In Wall 867Mbps 5GHz Dual Band PoE WiFi Access Point
Designed for new builds and retrofits, this UniFi AC In-Wall device converts an Ethernet wall jack into a dual-band 802.11ac access point. It delivers up to 867 Mbps on the 5 GHz band while also supporting 2.4 GHz for legacy devices. With two Gigabit Ethernet ports and PoE support, you can power a VoIP phone or a small switch from the same jack, keeping your workspace tidy.
The built-in antenna provides a maximum indoor range of about 100 m, enough to cover most office rooms or apartments. Quality of Service, VLAN tagging, and rate limiting let you prioritize traffic for video calls, streaming, or critical business apps. Security is robust with AES, WPA2-Enterprise, and multiple authentication options, protecting up to 250 concurrent users.
Benefits
Installation is as simple as swapping a wall plate - no extra power cords needed thanks to PoE. The UniFi Controller gives you a graphical dashboard for monitoring, firmware updates, and scaling across multiple sites. Because the device blends into the wall, it maintains a clean aesthetic while delivering enterprise-grade performance.
Features
- Dual-band 2.4GHz and 5GHz
- 867Mbps max throughput
- PoE powered, no extra outlet
- Three Gigabit Ethernet ports
- Integrated single-polarization antenna
- Supports up to 250 users
- VLAN and QoS enabled
- Easy UniFi Controller setup
Usage
Mount the unit in any standard wall box, connect it to a Cat5e or higher cable, and let your PoE switch supply power. Once powered, adopt the device in the UniFi Controller, assign SSIDs, and configure security policies. The AP works well in conference rooms, classrooms, or home offices, delivering fast, stable connections for laptops, phones, and IoT devices.
Specifications
| Features |
| Transmitting power |
20 dBmW |
| Maximum indoor range |
100 m |
| Quality of Service (QoS) support |
Yes |
| Wireless isolation |
Yes |
| Rate limiting |
Yes |
| VLAN support |
Yes |
| Wi-Fi Multimedia (WMM)/(WME) |
Yes |
| Number of users |
250 user(s) |
| Networking standards |
IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1Q, IEEE 802.3at |
| Frequency band |
2.4 - 5 GHz |
| Ethernet LAN data rates |
10,100,1000 Mbit/s |
| Maximum data transfer rate (5 GHz) |
867 Mbit/s |
| Maximum data transfer rate |
867 Mbit/s |
| 5 GHz |
Yes |
| 2.4 GHz |
Yes |
| Security |
| Security algorithms |
AES, TKIP, WEP, WPA, WPA-Enterprise, WPA-PSK, WPA2 |
| Management features |
| Firmware upgradeable |
Yes |
| Web-based management |
Yes |
| Ports & interfaces |
| DC-in jack |
Yes |
| USB 2.0 ports quantity |
0 |
| Internal RJ-45 ports quantity |
1 |
| Ethernet LAN (RJ-45) ports |
3 |
| Power |
| Power consumption (max) |
19 W |
| Power consumption (typical) |
7 W |
| Input current |
0.5 A |
| AC input voltage |
48 V |
| Power over Ethernet (PoE) |
Yes |
| Design |
| Internal |
No |
| LED indicators |
Yes |
| Reset button |
Yes |
| Product colour |
White |
| Placement |
In-wall |
| Antenna |
| Polarization |
Single polarization |
| Antenna gain level (max) |
2 dBi |
| Antennas quantity |
1 |
| Antenna features |
Integrated antenna |
| Certificates |
| Certification |
DFS, CE, FCC, IC |
| Weight & dimensions |
| Weight |
200 g |
| Height |
139.7 mm |
| Depth |
25.8 mm |
| Width |
86.7 mm |
| Packaging content |
| Quick start guide |
Yes |
| Mounting kit |
Yes |
| Other features |
| Operating temperature (T-T) |
-10 - 50 °C |
| Operational conditions |
| Operating temperature (T-T) |
-10 - 50 °C |
| Operating relative humidity (H-H) |
5 - 95% |
