Imagine trying to keep a pneumatic system at the exact pressure you need, only to see it drift and cause costly downtime. The Controller for Electro Pneumatic Regulator IC Series Digital Pressure Control is a compact digital unit that monitors and adjusts pressure automatically. It works with air or non-corrosive gas lines and gives you precise, repeatable control. If you struggle with unstable pressure, this Controller removes guesswork and protects your equipment.
Controller for Electro Pneumatic Regulator IC Series Digital Pressure Control
Many users find that manual valves cannot keep pressure steady when load changes quickly. Unsteady pressure can lead to product defects, safety concerns, and wasted energy. This Controller solves the problem by reading the pressure sensor and driving the regulator in real time. It keeps the set point within 0.5 % of full scale, so your process stays stable and efficient.
Benefits
- Exact pressure control reduces waste and improves product quality.
- Fast response time prevents overshoot during sudden load changes.
- Low power consumption fits 12-24 VDC supply limits.
- Built-in safety limits protect equipment from over-pressure.
- Easy wiring and clear display simplify installation and troubleshooting.
Usages
The Controller is ideal for manufacturing lines that use air-driven tools, for laboratory gas delivery systems, and for HVAC units that need stable pressure. It also works well in packaging machines where precise pneumatic timing is critical. Anywhere you need reliable, repeatable pressure control, this device can be installed quickly and start delivering results.
Key Features
- Supports IC series models such as IC10, IC30, IC50.
- Pressure range options of 0.1, 0.5, 0.9 MPa or -100 kPa.
- Proof pressure capability from 0.5 to 1.5 MPa.
- Power supply 12-24 VDC with 10 % tolerance.
- Up to 10-bit parallel command input (NPN/PNP open collector).
- Output options: 0-10 VDC or 4-20 mA for analog control.
- Four switch outputs, each up to 30 V/100 mA.
- Adjustable switch response from 5 to 640 ms.
- Linearity and hysteresis within 0.5 % of full scale.
- Operating temperature from 0 C to 50 C, IP40 or IP65 enclosure.
SPECIFICATIONS:
| Model |
IC11 |
IC12 |
IC13 |
IC14 |
| Pressure range |
0.1 MPa |
0.5 MPa |
0.8 MPa |
1.0 MPa |
| Proof pressure |
500 kPa |
1.5 MPa |
1.5 MPa |
1.5 MPa |
| Fluid |
- |
Air/Non-corrosive gas |
- |
- |
| Power supply |
- |
12 to 24 VDC (11-30 V), Ripple (p-p) 1% or less |
- |
- |
| Input |
- |
0 to 10 VDC / 4 to 20 mA (not by programming) |
- |
- |
| Power supply output |
- |
12 VDC, (Max. 300 mA) with accuracy of 12 to 14.4 VDC |
- |
- |
| Command output |
- |
1 to 5 VDC (Output impedance: 600
or less) with accuracy of $\pm$2.5% F.S. or less |
- |
- |
| Switch output |
- |
Output type: NPN, PNP open collector output |
- |
- |
| Switch response |
- |
Minimum output voltage: 1.0 V or less |
- |
- |
| Display |
- |
4-digit LED display (7-segment) |
- |
- |
| Display sampling rate |
- |
2.5 times/sec (approx.) |
- |
- |
| Temp. characteristics |
- |
$\pm$2.0% F.S. at 0 to 50°C |
- |
- |
| Operating temp. range |
- |
0 to 50°C |
- |
- |
| Storage temp. range |
- |
-20 to 60°C |
- |
- |
| Operating humidity range |
- |
35 to 85% RH (non-condensing) |
- |
- |
| Vibration resistance |
- |
10 to 55 Hz 1.5 mm amplitude, X, Y, Z directions for 2 hrs. each |
- |
- |
| Shock resistance |
- |
100 m/s
X, Y, Z directions, 3 times each |
- |
- |
| Sensor type |
- |
Only display unit with built-in sensor (Equipped with ITV11) |
- |
- |
| Port size |
- |
M5 Female (built-in sensor type) |
- |
- |
| Material |
- |
Enclosure: PBT, POM |
- |
- |
| Weight |
- |
Approx. 300 g (built-in sensor type) |
- |
- |
