Power outages and voltage spikes can shut down computers, servers and network gear in minutes. When that happens you can lose data, damage hardware and waste valuable work time. The Riello Vision Dual 3000 UPS gives you a steady, clean power source so your critical devices stay on and safe, even when the grid fails.
Riello Vision Dual 3000 UPS, 3 kVA, 2700 W, Tower & Rack with Riello
This is a high-performance uninterruptible power supply built for small to medium data rooms. It delivers 3 kVA and 2700 W of clean sine-wave power, protecting servers, storage arrays and networking equipment. If the mains voltage drops, spikes or disappears, the UPS switches instantly to battery power, keeping your workload running without interruption. Riellos advanced AVR and EMI filters also smooth out minor fluctuations, extending battery life and reducing wear on your gear.
Usages
The Vision Dual fits on a floor as a tower or slides into a 19-inch rack, so you can place it wherever space is limited. It is ideal for protecting office servers, point-of-sale terminals, surveillance cameras and telecom switches. Small businesses that run accounting software or cloud services can rely on it to avoid costly downtime. It also works well in laboratory setups where precise instruments need constant voltage.
Benefits
- Continuous power keeps your work from stopping during outages.
- Voltage regulation prevents damage from brownouts and surges.
- Hot-swap battery design lets you replace cells without shutting down.
- EnergyShare socket gives extra run-time for the most critical loads.
- Low 40 dB noise level lets the UPS sit in open office areas.
Key Features
- 3 kVA / 2700 W output capacity.
- Automatic Voltage Regulator for stable voltage.
- True sine-wave inverter output.
- EMI filters protect against spikes and transients.
- EnergyShare load-shedding socket.
- Hot-swap battery accessible from the front panel.
- Rackmount and tower installation options.
- USB and RS-232 communication ports.
- 9 AC outlets with C13 and C19 connectors.
- 98 % operating efficiency and 0.98 power factor.
- Predictive battery testing for early fault detection.
- Cold-start mode for inverter-only operation.
Specifications
| Features |
| Power protection features |
Over current, Over voltage, Short circuit, Under voltage |
| Noise level |
40 dB |
| Crest factor |
2.5:1 |
| Power factor |
0.98 |
| Surge energy rating |
300 J |
| Input frequency |
50/60 Hz |
| Input operation voltage (max) |
240 V |
| Input operation voltage (min) |
220 V |
| Output power |
2700 W |
| Output power capacity |
3 kVA |
| Ports & interfaces |
| RS-232 ports |
1 |
| USB 2.0 ports quantity |
1 |
| AC outlets quantity |
9 AC outlet(s) |
| Power plug |
C20 coupler |
| AC outlet types |
C13 coupler, C19 coupler |
| Battery |
| Battery recharge time |
4 h |
| Design |
| Product colour |
Black |
| Form factor |
Rackmount/Tower |
| Operational conditions |
| Operating relative humidity (H-H) |
0 - 95% |
| Operating temperature (T-T) |
0 - 40 °C |
| Weight & dimensions |
| Weight |
31.5 kg |
| Height |
87 mm |
| Depth |
625 mm |
| Width |
450 mm |
| Packaging data |
| Package weight |
36.5 kg |
| Other features |
| Package dimensions (WxDxH) |
600 x 760 x 240 mm |
| Operating temperature (T-T) |
0 - 40 °C |
